Cookie Img
Send Inquiry Send SMS
Super Industrial Lining Pvt. Ltd
Home » Products » Butt Weld Pipe Fittings

Butt Weld Pipe Fittings

Provided Butt Weld Pipe Fittings are intended to be bored on work site at the corners to combine pipes together as well as enable ending, branching, pipe diameter or direction change. The fittings then turns out to be a system’s segment for transporting liquids, chemicals, steam, gas, oils and more in an efficient and safe approach, over long or brief distances. Different sorts of butt weld pipe fittings can be socket welded or threaded. Flanges connect pipes through bolting them together, though our butt weld pipe fittings link pipes by soldering them together. Contingent upon size, our fittings demand effectively less material than flange fittings, which implies lower weight and lesser material cost.

Key Features:
  • Welded development grants more opportunity in outlining a format.
  • Utilizes less area, is more minimal and has more strength quality.
  • Give ideal stream attributes, without sharp corners or pockets.
  • Makes less frictional resistance, less turbulence and no pressure loss.
HDPE Molded Bend 90 Degree
close
HDPE Molded Bend 90 Degree
02
HDPE Molded Bend 90 Degree is also known as High Density Polyethylene molded bend. This bend is made up of supreme quality HDPE material. It is economical, reliable, temperature resistant and highly durable in nature. They are manufactured by highly qualified engineers using a virgin raw material to comply with the set national and international standards. It is widely used in sprinkler systems and water supply applications. They are available in different dimensional specifications.
Stub End L/N (Butt Weld Type)
close
Stub End L/N (Butt Weld Type)
08
Stub End L/N (Butt Weld Type) is used to join two pipes. It is also known as long necked stub end which is manufactured with supreme quality of material using butt weld type technology which prevents overlapping and gives a smooth appearance. They gives the flexibility to remove the part of joint if does not required. They are used for high pressure lines and available in different sizes and plastic and stainless steel variants.
Stub End S/N (Butt Weld Type)
close
Stub End S/N (Butt Weld Type)
09
Stub End S/N (Butt Weld Type) is used for joining the pipes where there are moderate or low pressure conditions. It is also known as short necked stub ends or lap joints and is used for various industrial and domestic purposes. One of the best features of this product is that it allows the user to remove the joint when not required or to repair damaged part easily without much disturbance to the line. Their construction is done using butt weld technique.
Moulded End Cap (Butt Weld Type)
close
Moulded End Cap (Butt Weld Type)
10
Moulded End Cap (Butt Weld Type) is used in various industries to provide capping to the open end of pipe. They are manufactured using butt weld technology which gives it a smooth structure. It has been designed using the top quality raw material to ensure its sturdy performance. They are available in different standard sizes according to the bore size of installed pipe and can be customized according to the consumer’s requirement.
Eccentric Reducers (Butt Weld Type)
close
Eccentric Reducers (Butt Weld Type)
11
Eccentric Reducers (Butt Weld Type) are used as a fitting between two pipes of different diameters. They are used in the condition where the diameter of pipe on upstream side is larger than that of downstream side. These reducers are made up of supreme quality of material and butt type welding to ensure its smooth nature, which enables it to remain parallel to the connecting pipe without any gap. They are available in different sizes according to the pipe’s diameter.
Concentric Reducers (Butt Weld Type)
close
Concentric Reducers (Butt Weld Type)
12
Concentric Reducers (Butt Weld Type) are used when there is a need to increase the diameter of existing pipe or tube. They are cone shaped, the end with fewer diameters is fitted in the pipe needed and the other end will fulfill the need of required diameter. These reducers are available various standard sizes and which are precisely constructed by highly experienced professionals using butt weld technology to assure its smooth appearance.
Buttweld 90 Degree Fabricated Bends
close
Buttweld 90 Degree Fabricated Bends
14
Buttweld 90 Degree Fabricated Bends are used to join two pipes to change direction of flow in the piping system. They are manufactured using a high grade of raw material such as PVC, aluminum, or other metal alloys. These bends are also used as a ventilation source when installed in a duct made for ventilation. Their manufacturing is done with buttweld technology to ensure its fine finish and long lasting operational life.
Fabricated Bends 60, 45, 30 Degree
close
Fabricated Bends 60, 45, 30 Degree
15
Fabricated Bends 60, 45, 30 Degree is used for tubing purpose at different angles in a piping system or a reservoir. They are used in various industries such as chemical, food, and beverage industries. These bends are available in different shapes and angle sizes required for different purposes. They can be welded permanently into a source or can be used as a detachable solution. These bends are available in plastic or metal form.
Moulded Bends 90 (Butt Weld Type)
close
Moulded Bends 90 (Butt Weld Type)
21
Moulded Bends 90 (Butt Weld Type) is used as an external fitting to a pipeline when a change is required in the flow of direction of a fluid inside the pipeline. They are generally used when liquid is flowing to top from bottom or to extreme left or extreme right. They are manufactured using the best quality of materials such as PVC or stainless steel as per requirement and the place where it needs to be installed. Their manufacturing is done using butt weld technique to give it a robust nature and smooth finish.
Stub End S S (Butt Weld Type)
close
Stub End S S (Butt Weld Type)
27
Stub End S S (Butt Weld Type) is also known as stainless steel stub end which is used in pipe fittings to either change the flow direction or to attach another pipe in the piping system to extend the existing one. They are made up a high quality of stainless steel to conform to the set industry standards. It can be joined using butt weld technology to give it smooth surface and fine finish. They are stable to different temperature conditions and have a robust nature. The main advantage of using this stub end is to avoid re-welding process as they are easy to install and remove.


SUPER INDUSTRIAL LINING PVT. LTD. All Rights Reserved.